Convert STL into Fusion 360 Model
May 12, 2019Convert STL into Fusion 360 Model
Importing a STL model into Fusion 360 usually results in many faces that aren’t easily workable. Quick bullets on how to correct this.
-
Insert–> insert mesh.
-
Navigate to STL
-
Will get pink model, which means dealing with a mesh body.
-
To merge faces, keep design history off. So, right click on root of project and “Do not capture design history”
-
Right click on mesh body and “Mesh to BRep”
-
Change to PATCH mode.
-
Modify—> Merge , and select faces